VoIP Blogging > Help with Voip router + Wireless router config - Overclock.net ...

[Overclock.net - Overclocking.net] This is what I would do (and which this is how I used to set it up for customers when I worked for Verizon) First the modem is it a dumb modem (without firmware/no default gateway) or is it smart (with default gateway and routing IP) if it is a smart modem this is what I would suggest for example I would do modem>VOIP>Router and the IP addressing would go in this order for modem 192.168.1.1, VOIP 192.168.2.1, and router 192.168.3.1 and make sure all PCs, or laptops are set to automatic assign an IP in the TCP/IP settings (and in Vista it wont hurt to unselect IPv6) since the 192.168.x is the routing IP it will clear up any issues. Also for example Vonage for VOIP routers be default come with a 192.168.15.1 it may be that your modem and router maybe just have the same routing IP which maybe I may be a noob about it but has always caused werid issues to my knowledge I hope this helps

Previous [Previous] What Is VoIP and How Does It Work...

Next [Next] Nortel and Avaya Clients Protect VoIP ROI with Multi-Platform ...

Some related posts from Technorati and Google.

[PR Hub] Nortel and Avaya Clients Protect VoIP ROI with Multi-Platform VoIP ...: GAITHERSBURG, Maryland - For SMEs invested in analog PBX and POTS telephony equipment, Patton's reduced pricing places the stability and interoperability of carrier-class SmartNode(TM) VoIP within budgetary reachPatton (www.patton.com) -- the leader in business and carrier-class network access, connectivity, Voice-over-IP and triple-play equipment -- announces reduced pricing on all FXS models of the SmartNode(TM) 4110 VoIP Gateway Series effective 1 June 2009. Expected to stimulate the analog VoIP gateway market, Patton's lower prices reflect an average decrease of 20 to 40 percent for distributors, resellers and end-user customers.

[Alliant DataTel, Inc.] VoIP Phone Hardware - What Hardware Do I Need To Setup My VoIP phone?: Our product specialists can find you any product or service under the sun, and our technicians can install or repair any of the following ipPBX, and VoIP equipment brands including 3Com-NBX, Artisoft, ADTRAN Routers, Accutone, Adix, AltiGen, Amtelco, A+, Avaya, Bogen, Cisco Partners, Executone, Asterisk, Extrom, Hitachi, Fujitsu/Focus, Nitsuko, Meridian, Polycom, Prostar, Plantronics, Samsung, Telco Systems, Telect, Tel-Plus, Telesynergy, Telrad, Applied Voice Technology (AVT), Artisoft, Aspect, Asterisk, Asuzi, AT&T, Atlas, Avaya, AVG-Eagle, BBS Telecom, Bizfon, Bosch, Cisco, Cohort, COM2001 Technologies, Comdial, Computer Talk Technology, Cortelco Kellogg, Creative Integrated Systems, Dash, Dba Telecom, Duvoice, Encore, Ericsson, Estech (ESI), Executone, Extrom, FCI, Flash Communications, Fujitsu, Galaxy, Harris, Hitachi, IDS, Intecom, Inter-Tel, Interactive Intelligence, Isotec, ITT, Iwatsu, Kanda, KS Telecom, Lucent Technologies, Macrotel, MCK Communications, Merlin, Mitel, NBX Corporation, NEC Communications, Newtronix, Nitsuko America, Nortel Networks, Northcom, OmniLink, Omega, Premier, Picazo Communications Quintum, Prostar, Redcom, Samsung, Spectralink, Spirit, Sprint, Starplus, Rolm, Teleco, Tadrian, TalkSwitch, Telematrix, Telrad, TIE, TMC, Toshiba, TouchWave, TransTel, Teltronics, Triad, Trilium, TT Systems, Vodavi, Walker, Zultys and more!

[PBX Info | Free PBX, PABX, IP PBX, VOIP and Telephone Information Resource Forum] IP Softphone 2050 - occasional garbled speech - PBX Info | Free ...: I guess I'm just looking for someone who has tried this arrangement, of cable modem --- to --- wireless router --- to --- laptop with Nortel softphone, to unequivocally state that the "wireless" link is the weak point and that a direct ethernet cord to the cable modem will greatly improve the call quality.

[Extreme Seo Internet Solutions - News] Search Engine Optimization forumIB asks government to block VoIP ...: "In the absence of Caller Line Identification (CLI) parameters of calls landing from abroad, it's next to impossible to identify the country of location of the caller. Also, a number of service providers in India have started providing VoIP solutions for making calls both domestics as well as foreign.

[Voxilla VoIP Forum] How to set up an SPA3102 to receive registration from VoIP phone: Is there a reason why you've left the 5060 port in the SIP tab and changed it to 5061 in the PSTN tab? I know this probably sounds like a daft question, but the reason I ask is because I thought that the SIP port on the SIP tab handled the connection from the SIP side of things, and the PSTN tab handled the PSTN side of things--- I may be more than a little confused about this aspect of it...

[Black Hat Forum] Reset the IP on my Charter (Cable) ISP so I can post on Craigslist ...: If I change the MAC addy on the router, it'll tell Charter that I need a new ip? Also, I use Vonage as a VoIP service, if I change my routers ip will that affect my service, I think I remember telling them one of my MAC addresses as well.

[Ascent Technology Limited - New items] Wireless - Routers,Bridges,APs - D-Link DIR-685 Storage, Wireless ...: Integrated 802.11n high-speed wireless LAN provides a fast Internet connection to your wireless computers, and smooth streaming of music/video from the integrated network storage to your TV and stereo equipment. The router’s MIMO antenna technology ensures that its wireless signal transmission/reception is not only fast but also extended to all wireless devices of your home.

[Norbert's blog] Rogers Rocket Mobile Internet Service - Voice over IP - Vox: More to the point, it would not have been effective since my Linux software router is not directly visible to the Internet - the 3G modem is connected to Rogers over a private network and I had no means of getting Rogers to include the Port Forwarding rules on their boundary router.

[Voxilla VoIP Forum] SPA3102 one stage dialing: On the SPA3012 you need to setup the VoIP-To-PSTN Gateway with the required authentication method. If you are on a different network from the SPA2100 you will need to set NAT Mapping Enable Yes, and you may need to use a STUN server and set other NAT Support Parameters to avoid one-way audio.

[BIZ|Tech Blog] VOIP Calls Dropping After 30 Minutes « BIZ|Tech Blog: It seems that nexVortex, the VOIP carrier in this case, sends a SIP re-invite after 30 minutes just to make sure the call is really still active.  They understandably do not want to tie up resources on a call that had already ended.  nexVortex was always sending the re-invite on the port from which it was seeing the initial connection.  After 30 minute, my firewall no longer was associating that port with my initial connection, and dropped the packet.  As such, the TalkSwitch never saw the re-invite and thus never responded.  When nexVortex never got a response, it figured the call was dead and dropped it.

[bMighty Blog] Cisco Refreshes Its Small Business Pro Lineup | bMighty.com: Blogs ...: The most important new product is the SA 500 security appliance, which Mark Monday, Cisco vice president of product marketing, described as a "unified threat management product." The SA 500 is designed to protect small businesses from threats via Web and e-mail, and provide security for VPNs and Firewalls. Cisco worked with Trend Micro to make the SA 500 use SaaS technology to check every since e-mail message and Web URL accessed -- with only a few milliseconds delay, Monday said.

[Advance Technologies] Advance Technologies » Blog Archive » Vigor 2110 Series Broadband ...: The DrayTek Vigor 2110 Series routers are designed to be the ideal cable-broadband sharing and firewall device for to the SoHo (Small Office / Home) user. They combine compatibility with the latest cable modem connections (from Virginmedia) and other Ethernet fed Internet connections together with performance, features and price into an attractive, relible and easy-to-use product, with the pedigree and thoughtful design DrayTek are renowned for.

[Basic Warez Blog] cFosSpeed 4.51 Build 1501 Beta: FosSpeed is a high-performance network driver for DSL modems and routers. Highlights of this program include Traffic Shaping, For DSL modems and routers, Fully compatible with conventional PPPoE drivers, Automatic router detection, Self-calibrating, Highly responsive when used with online games and Peer-to-Peer networks like eMule or Kazaa, and Freely configurable priority classes.

[tony.mattke.net] Cisco VOIP Basics | tony.mattke.net: ! Router 2!interface FastEthernet 0/0 ip address 10.1.0.2 255.255.255.0!dial-peer voice 100 pots destination-pattern 2020 port 0/0!dial-peer voice 101 pots destination-pattern 2120 port 1/0!dial-peer voice 200 voip session target ipv4:10.1.0.1 destination-pattern 4....

[Stephen Foskett, Pack Rat» Computer history Archives - Stephen Foskett, Pack Rat] Experimenting With VoIP - Stephen Foskett, Pack Rat: Although a growing number of SIP services allow free calling and open connectivity, it is extremely difficult to get out of the SIP world and into conventional phone and Internet voice networks. It’s a lot like OpenID or XMPP: Most don’t support it at all, some are happy enough to allow you in, but no one wants to let you out!

[Alan Spicer Marine Telecom Blog] Alan Spicer Marine Telecom Blog » Blog Archive » Ericsson W25 (W35 ...: In any case, just thought you could shine some light on this on your blog or if the forum still exists then I’d like to post it there..I have been poking around this device for over a year now and for hobbyists like ourselves, it is a neat littletrinket..:-) I was particularly surprised to find that you can actually do voip traffic over the cellular data network without the latency issues as long as you are not jumping from tower to tower.Cheerios!!TAEvent Log——————————–Jul  6 13:31:30 (none) daemon.warn wuid_log[3050]: Error in retrieving unlock_code in                RedBoot config data.Jul  6 13:31:30 (none) daemon.err wuid_log[3050]: Invalid uid/gidJul  6 13:31:35 (none) daemon.info wuid_log[3050]: doc text/link not setJul  6 13:31:35 (none) daemon.notice wuid_log[3050]: Session id not found ($wui.sid$)Jul  6 13:31:35 (none) daemon.warn wuid_log[3050]: Error in retrieving unlock_code in                RedBoot config data.Jul  6 13:31:35 (none) daemon.err wuid_log[3050]: Invalid uid/gidJul  6 13:31:35 (none) daemon.notice wuid_log[3050]: Session id not found ($wui.sid$)Jul  6 13:31:36 (none) daemon.warn wuid_log[3050]: Error in retrieving unlock_code in                RedBoot config data.Jul  6 13:31:36 (none) daemon.err wuid_log[3050]: Invalid uid/gidJul  6 13:31:36 (none) daemon.notice wuid_log[3050]: Session id not found ($wui.sid$)Jul  6 13:31:36 (none) daemon.warn wuid_log[3050]: Error in retrieving unlock_code in                RedBoot config data.Jul  6 13:31:36 (none) daemon.err wuid_log[3050]: Invalid uid/gidJul  6 13:31:37 (none) daemon.info wuid_log[3050]: doc text/link not setJul  6 13:31:40 (none) daemon.notice wuid_log[3050]: Session id not found ($wui.sid$)Jul  6 13:31:40 (none) daemon.warn wuid_log[3050]: Error in retrieving unlock_code in                RedBoot config data.Jul  6 13:31:40 (none) daemon.err wuid_log[3050]: Invalid uid/gidJul  6 13:31:41 (none) daemon.notice wuid_log[3050]: Session id not found ($wui.sid$)Jul  6 13:31:41 (none) daemon.warn wuid_log[3050]: Error in retrieving unlock_code in                RedBoot config data.Jul  6 13:31:41 (none) daemon.err wuid_log[3050]: Invalid uid/gidJul  6 13:31:42 (none) daemon.notice wuid_log[3050]: Session id not found ($wui.sid$)Jul  6 13:31:42 (none) daemon.warn wuid_log[3050]: Error in retrieving unlock_code in                RedBoot config data.Jul  6 13:31:42 (none) daemon.err wuid_log[3050]: Invalid uid/gidJul  6 13:31:48 (none) daemon.info wuid_log[3050]: doc text/link not set

Reflected tags on Technorati: Blog, ,